- Drive shafts are balanced at a minimum of 6000 RPM
- Drive shafts are balanced to under .25 oz - inches
- Drive shaft run outs are to be with in .015
- U Joint clearances are to be .002 0r less
- Balance weights are fused welded to shaft tube
- Drive shafts are rebalanced after welding
- Drive shafts are manufactured with Dana Spicer parts

PRICE: $430 FREE SHIPPING

We need 20 orders to recieve this pricing. You will need to contact Reinhart Automotive at 904-276-5003 and place your order. Just mention that you are part of the Group Purchase. Once atleast 20 orders have been placed, they will be shipped out. So the sooner we can all get our orders in, the sooner we'll have our driveshafts. Please also post here only if you have or plan for sure to order one, so we can keep track of how it's going. Thanks!!

I will keep the official list over at SCCoA becuase I can continue and edit it with thier program. Here is the link to view it:

http://sccoa.com/forums/showthread.php?p=274325#post274325

1994 Mark VIII 15.71 @ 91.85
1993 Thunderbird SC 13.98 @ 101.30
E-Mail --> thomasma@alltel.net

comments?

David
"Walking isn't a lost art. One must, by some means, get to the garage."

1997 Mark VIII
14.573 @ 93 MPH

Thomas

1994 Mark VIII 15.71 @ 91.85
1993 Thunderbird SC 13.98 @ 101.30
E-Mail --> thomasma@alltel.net

1997 Mark VIII
14.573 @ 93 MPH

Thomas

1994 Mark VIII 15.71 @ 91.85
1993 Thunderbird SC 13.98 @ 101.30
E-Mail --> thomasma@alltel.net

$460 plus shipping that might be the price from Denny's.

Jeremi
95 Mark VIII - Soon to be Supercharged
Stock ? - yeah right ...

Yes, I think you could. It comes preassembled with the yokes and u-joints already all together. So all you have to do is drop the old one out and stick this one in it's place.

Thomas

1994 Mark VIII 15.71 @ 91.85
1993 Thunderbird SC 13.98 @ 101.30
E-Mail --> thomasma@alltel.net

I had 35 people say they were interested, we should be able to get atleast 20 orders put together. Let's make a real effort to have all 20 orders in by Monday!!!

Thomas

1994 Mark VIII 15.71 @ 91.85
1993 Thunderbird SC 13.98 @ 101.30
E-Mail --> thomasma@alltel.net

I'll consider putting my name on the list too, not so much for the $30 savings but to help out with the order. If you get stuck a man short I'll buy, PM me and I'll give you my office number - call me I can buy anytime if your a man short.

My reason for holding off is that the discount is about 6.5% (not bad, but not great) and I'm working on lining up help to install the Driveline. I understand you need to mess with the gas tank and the exhaust? I need to see if BlackICE can help me with this if I order it (so it doesn't become another item I need to move). And, I'd like to buy my chip first. . . hmm, wonder if Dennis would discount the chip for me too if I ordered it with the DriveShaft? Right now my focus is a chip and 2 1/2" exhaust with an X-pipe. Then, DriveShaft and Gears. I'll move any of those up the list for a 20% discount of course

Thank you for putting this together; very cool.

Thanks,

old94

Dave

Thomas

1994 Mark VIII 15.71 @ 91.85
1993 Thunderbird SC 13.98 @ 101.30
E-Mail --> thomasma@alltel.net

Thomas

1994 Mark VIII 15.71 @ 91.85
1993 Thunderbird SC 13.98 @ 101.30
E-Mail --> thomasma@alltel.net

After reading your post on the Apten chip deal I may move up the driveshaft. . . . Hey Craig - up for a drive shaft install in a week or two?

1997 Mark VIII
14.573 @ 93 MPH

Ryan
94 Garnet Red Glaze
130k and counting...

"A good way to look at the discount is, its $70 cheaper than Dynotech offers. With no middle man involved, they are more expensive than Dennis. I seriously doubt makes very much at all on selling these, as stated previously."

That is a good point! If it makes everyone feel better, the normal price is $630 shipped, so you are SAVING $200!!!!! j/k

Thomas

1994 Mark VIII 15.71 @ 91.85
1993 Thunderbird SC 13.98 @ 101.30
E-Mail --> thomasma@alltel.net

I doubt Dennis works on Sunday - I know I wouldn't (laughter). So, I'll call Monday (about 10am Pacific) and put my name on the list too.

Come on ya'll - its a good time to buy

Now, if someone could let me know when Apten will be back up and running I could be totally ready to complete my Phase 2 (will also need the 2 1/2" X-Pipe exhaust kit too).

Thank you Thomas for putting this together,

Thomas

1994 Mark VIII 15.71 @ 91.85
1993 Thunderbird SC 13.98 @ 101.30
E-Mail --> thomasma@alltel.net

I'm local to Dynotech, can I pay through Dennis, and just go pick mine up from them without any shipping cost built in to the price?

For example $400.00
Ie, no shipping to Dennis in Florida should save some cost, and it saves him having to pay the freebie shipping back up to me.
ie, from Troy,MI to Florida, and back to Troy, MI.

Just curious.
Seems like a waste of shipping costs, and definately not worth the risk of damaging a well balanced shaft. Have you seen how they ship them? YIKES!

Thomas

1994 Mark VIII 15.71 @ 91.85
1993 Thunderbird SC 13.98 @ 101.30
E-Mail --> thomasma@alltel.net

Thomas

1994 Mark VIII 15.71 @ 91.85
1993 Thunderbird SC 13.98 @ 101.30
E-Mail --> thomasma@alltel.net